Seat lock and releasing mechanisms
Refitting the seat releasing mechanism
Note
The spare latch (2) comes complete with Bowden cable.
Latch and Bowden cable should never be separated.
Installation is a reversal of the removal procedure.
Smear threadlocker on ring nut (6) and screws (4).
If you have removed the seat, refit it (Sect. E 3,
(2) is locking the pin of the rear support fixed to the seat and that the Bowden cable is not trapped.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_6_6_00.30.1.html (3 of 3) [10/7/2008 8:43:33 PM]
Refitting the
seat) and then lower the seat and check that the latch