Ducati Monster 695 User Manual page 142

Clutch hydraulic control
Spare parts catalogue
Clutch
Clutch control
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the clutch master cylinder assembly
Warning
Critical safety components. The clutch master cylinder manufacturer recommends that you do not attempt to service
the internal components of the clutch master cylinder (1). Incorrect overhaul of these critical safety components can
endanger rider safety.
Only a limited number of master cylinder parts should be replaced, that is control lever, reservoir assembly and
cylinder fasteners.
Operations
Drain the clutch circuit
Undo the special screw (9) -keep the seals (8)- to release the clutch cylinder assembly (1) from the clutch control
hose (6).
Unscrew the two screws (7) securing the master cylinder to the handlebar.
Remove the complete clutch cylinder assembly (1): please refer to exploded view diagram at the beginning of this
section for clutch cylinder disassembly.
Refitting the clutch master cylinder assembly
Fit the clutch master cylinder assembly (1). Line up the clamp / master cylinder body jointing line (A) with the dot (B)
on the handlebar.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_2_6_00.26.1.html (2 of 8) [10/7/2008 8:43:23 PM]
Reference See Section
D 4, Draining the clutch circuit