Ducati Monster 695 User Manual page 511

Casing unit: crankcases
Note
When removing the circlip, take care not to score the shaft surface.
Undo the casing jointing screws working from the generator side (3).
Unscrew the two screws (29) on the clutch-side casing (16) near the vertical cylinder housing.
Use generator cover or a service cover with puller part no. 88713.1749 fitted to it. Secure cover to casing with some
of the original screws and begin separation by turning the central pin of the tool.
Tap on gearbox secondary shaft with a plastic hammer to separate casings.
Note
Do not damage or lose the shims on the shafts and on the selector drum.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9B9_00.74.1.html (3 of 25) [10/7/2008 8:46:34 PM]