Flywheel - generator
Disassembling the generator cover
Undo the three stator retaining screws (24) and the two cable guide bracket (30) retaining screws (31) from inside
the generator cover.
Remove stator (32) and cable guide (30).
Inside generator cover, at the crankshaft, there is a bearing (26) held in place by a circlip (27).
Remove circlip (27) with suitable tweezers.
Remove bearing (26) using a universal puller.
Removing the flywheel - generator assembly
Fit tool part no. 88713.2036 and secure it to the M10 holes (D) (for the side stand fasteners) to prevent rotation.
Then lock tool on flywheel with the screw (E).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_8_9_00.72.1.html (4 of 14) [10/7/2008 8:46:19 PM]