Ducati Monster 695 User Manual page 238

Footpeg supports
Remove the complete right footpeg plate (8) and collect the washers (11).
To remove the rear footpeg from the plate, extract the snap ring (5) and withdraw the pin (4) to release footpeg (7),
plates (10), balls (9) and springs (12).
To remove the front footpeg from the plate, extract the snap ring (5) and withdraw the pin (4) to release footpeg (7)
and spring (6).
Repeat procedure for the left footpeg.
Note
It is also possible to remove the footpeg even with footpeg plate fitted to the vehicle.
Refitting the footpegs
The assembly procedure described below applies to both footpeg plates.
Right side: place the spring (6) between the end stops of the front footpeg (7) and fit them to the footpeg plate.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_4_7_00.43.1.html (3 of 5) [10/7/2008 8:44:18 PM]