Clutch unit: APTC wet clutch
Smear recommended grease onto nut (8) thread and primary shaft thread, then fit the nut finger tight onto primary
shaft.
Lock clutch housing with tool part no. 88713.2556, so to hold it while tightening nut (8).
Tighten the nut (8) to the specified torque (Sect. C 3).
Remove the three tools part no. 88713.2591.
Fit the pusher plate (5) inside the hub (13).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_6A9_00.67.1.html (11 of 12) [10/7/2008 8:45:55 PM]