Head unit: camshafts
Install seal (3) as shown.
Insert the spacer (4) into the seal (3) and push it until it contacts the bearing (5).
Note
Ensure that spacer (4) faces the seal so as not to damage it.
Caution
If you have left the rocker arms in place in the head (Sect. N 4.4,
camshaft (16) until finding the position at which the cams will not contact the rocker arms.
Before fitting the camshaft in the head, check shaft punching (A):
O: horizontal
V: vertical
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4C9_00.64.1.html (15 of 18) [10/7/2008 8:45:35 PM]
Head unit: valves - rocker
arms), rotate the