Clutch hydraulic control
Warning
Incorrectly positioned hoses can cause faults and interfere with moving parts.
Position both seals (8) and tighten the screw (10) to the specified torque (Sect. C 3,
Refit the drain (11) and the dust seal (12).
Please refer to the table on next page for proper positioning of clamps for hose (6).
Operations
Fill the clutch circuit
Warning
Lubricate the O-ring (13) and the pushrod (16) before reassembly.
Clutch hose routing
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_2_6_00.26.1.html (6 of 8) [10/7/2008 8:43:23 PM]
Reference See Section
D 4,
Filling the clutch circuit
Frame torque
settings).