Ducati Monster 695 User Manual page 368

Cylinder heads: side covers / timing system
Reassembling the timing system
Reassembling the timing belt rollers on camshafts
Ensure that keyway on camshaft end is in good condition and with no burrs.
Install a key (C) into camshaft keyway, if previously removed.
Assemble the components fitting belt roller (B) and washer (15) on flange (17) as shown, use reference marks to
ensure correct positioning.
Caution
On refitting, make sure to line up the mark "D" of spacer flange and mark "A" on belt roller and washer.
Tighten the three screws (12) onto flange.
Fit the belt roller assembly (16) on the camshaft, driving it fully home.
Warning
Ensure that the key does not slip out of its seat.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (8 of 17) [10/7/2008 8:45:27 PM]