Ducati Monster 695 User Manual page 331

Fuel injection-ignition system components
that calculates the ignition advance. The power module (built into the electronic control unit) also
guarantees constant coil charge, operating on the dwell angle.
Horizontal head coil (1) is placed under the airbox. Remove the airbox (Sect L 7,
to gain access to the coil.
Vertical head coil (2) is located next to the wheel, in the rear left side of the vehicle.
Disconnect spark plug cable (3) to remove the coil (1).
Undo the nuts (4) and collect the washers.
Remove the coil (1) from the plate (5).
Disconnect the spark plug cable (6) and remove screws (7) to remove the coil (2).
Remove the coil (2).
Installation is a reversal of the removal procedure. Be sure to tighten the nuts (4) and screws (7) to
the specified torque (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_M_3_3_00.57.1.html (11 of 15) [10/7/2008 8:45:06 PM]
Frame torque settings).
Removing the airbox)