Table of Contents
Advertisement
Gear change control
Spare parts catalogue
Gearchange lever - foot rest
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the gear change control
Unscrew and remove the retaining pin (1) of the gear change pedal (2), collect the washer (6) and the O-rings (17).
Unscrew and remove the screw (16) securing the small lever to the gearbox shaft.
Withdraw the small lever (14) together with the gear change control assembly.
Note
Mark small lever (14) position relative to the gear selector shaft.
To remove the small lever (14) from the gear change control assembly, unscrew the screw (15).
Disassembling the gear change control
Please refer to the exploded view at the beginning of this section for indications on disassembly and replacement of
gear change control components.
If the bush (5) inside the pedal (2) needs replacing, drive the replacement bush in place using a press. The bush
must be seated 2 mm deep below pedal outer face.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_5_6_00.29.1.html (2 of 3) [10/7/2008 8:43:31 PM]
Hide quick links:
Advertisement
Table of Contents
