Thread - Ducati Monster 695 User Manual

Electric starting
Starter contactor (1) is elastically connected to the frame.
Disconnect the battery (Sect. P 2, Battery).
Remove the starter contactor from its housing.
Undo the nuts (4) and collect the spring washers (3).
Remove the contactor-starter motor cable (2).
Remove the contactor-battery cable (5).
Disconnect the connector (2) of the starter contactor from the wiring.
Starter contactor operational check
Apply a 12V (battery) across the positive (A) and negative (B) terminals of the connector.
Connect a multimeter between the two poles [threaded pins (C) and (D)] of the starter contactor and
then check for electric continuity (Sect. P 9,
continuity is not ensured, replace the starter contactor.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_P_3_9_00.80.1.html (5 of 6) [10/7/2008 8:47:02 PM]
How to use the multimeter to check electric systems). If