Testers
Switch on the DDS (1), refer to
Connect the power and diagnosis cable (Measurement Module) (3) to measurement module connector (E) of the DDS
(1).
Connect the pressure sensor (5) to port (A) or (C) of cable (3).
Press "Measurement module" icon on DDS (1) to select the "Measurement module" function; then press on "Pressure
Measurement" icon (F) and then "Start" (G).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_5_5_00.19.1.html (28 of 41) [10/7/2008 8:43:05 PM]
"Instrument power
supply".