Ducati Monster 695 User Manual page 154

Rear brake control
Remove the footpeg plate (Sect. H 4,
Withdraw the retaining pin (5) securing the rear brake lever to the footpeg bracket. Remove the spring (6), the
complete brake lever (9) and the washer (12).
Disassembling the rear brake control
The spare brake master cylinder is supplied as a complete assembly. The inner components may not be replaced
individually.
Please refer to the exploded view at the beginning of this section for indications on disassembly of master cylinder
outer components.
If the bush (14) inside the brake pedal (9) needs replacing, drive the replacement bush in place using a press. The
bush must be seated 2 mm deep below pedal outer face.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_4_6_00.28.1.html (3 of 6) [10/7/2008 8:43:28 PM]
Removing the footpegs).