Ducati Monster 695 User Manual page 150

Front brake control
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the front brake master cylinder
Warning
Critical safety components. The brake master cylinder manufacturer recommends that you do not attempt to service
the internal components of the brake master cylinder. Incorrect overhaul of these critical safety components can
endanger rider and passenger safety.
Maintenance operations on these units are limited to replacing: control lever, reservoir unit and reservoir and cylinder
fasteners.
Operations
Draining the braking system
Disconnect the brake line from
master cylinder
Unscrew the retaining screws (10) and remove the front brake master cylinder unit (1) from the handlebar.
Please refer to the exploded view at the beginning of this section for indications on disassembly of master cylinder (1)
components.
Refitting the front brake master cylinder
Warning
Incorrectly positioned hoses can cause brake faults and interfere with moving parts. Correct position is shown in the
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_3_6_00.27.1.html (2 of 3) [10/7/2008 8:43:25 PM]
Reference See Section
D 4, Filling the brake circuit
G 3, Removing the front brake system