GTIN Enable
GTIN
GTIN Enable
Enables/Disables the ability to convert UPCE, UPCA, EAN8, and EAN13 labels
into the GTIN 14-character format.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
051501(CR)
GTIN = Enable
Product Reference Guide
If add-on information is present on the base label prior to the
conversion taking place, the add-on information will be appended
to the converted GTIN barcode.
NOTE
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
051500(CR)
GTIN = Disable
169