Setting The Tool Number - GRAPHTEC FC8000 SERIES User Manual

Setting the Tool Number

Set the tool that is used in each of the tool condition numbers. (Setting range: 1 to 3)
Operation
1
Press the [CONDITION] key in the default screen.
CONDITION setting screen (1/3) is displayed.
2
Press the POSITION (▼) key.
CONDITION setting screen (2/3) is displayed.
3
Press the [3] key (ASSIGN TOOL).
ASSIGN TOOL setting screen is displayed.
* Display may vary depending on the mounted tool.
4
Press the POSITION (◄►) key and select the tool condition
number (CONDITION No.).
Next page
POSITION
Supplement
It will return to CONDITION screen (2/3) without
changing the settings when you press the [4] key
(CANCEL).
Supplement
Tool number and attached position
l
POSITION
TOOL 1: When using the tool attached in
TOOL 2: When using the tool attached on the tool
TOOL 3: When using the tool attached in forward
Attaching methods of the tool
l
See "Attaching a Tool"
Assignment (Switching the Tools)"
2-32
For half cutting (backward)
For cutting out (forward)
backward position of the tool folder
station with the 2 pen option
position of the tool holder
P.2-4 and "2-Pen
P.14-7 .