Modifying The Signaling Network Service And Isdn/Pstn Network Service Settings; Fast Configuration Wizard - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
Modifying the Signaling Network Service and ISDN/PSTN Network Service
Settings
The Fast Configuration Wizard assists in configuring the Signaling Network Service. It starts
automatically if no Signaling Network Service is defined. This happens during First Time
Power-up, before the service has been defined or if the Signaling Service has been deleted,
followed by an RMX restart.
The IP Management Service tab in the Fast Configuration Wizard is enabled only if the factory
default Management IP addresses were not modified.
Both IPv4 and IPv6 are supported. For IPv6 addressing information see the RMX 1500/2000/4000
System Administrator's Guide for Maximum Security Environments "IP Network Services" on
page 11-2.

Fast Configuration Wizard

1
1-28
Enter the required IP Signaling information in the dialog box.
RMX 2000
RMX 1500
RMX 4000
Polycom, Inc.