System Status And System Hardware Details - Allied Telesis AR410 User Manual

Getting Started with the Graphical User Interface (GUI)
Model name
Software release
Help, Save and Exit
Sidebar menu
Port status
System status
Software Release 2.7.1
C613-02021-00 REV F
10. Configure an IP interface to run SSL over
To configure an IP interface that SSL will be run over, first enable IP using
the command:
ENABLE IP
To make the IP interface, and 172.30.1.105 the interface's IP address,
VLAN1
use the command:
ADD IP INTERFACE=vlan1 IP=172.30.1.105
To add an IP route on this interface with a next hop of 172.30.1.254, use the
command:
ADD IP ROUTE=0.0.0.0 INTERFACE=vlan1 NEXT=172.30.1.254
For this example to succeed, you would have to log in as "cipher" rather than "manager"
when connecting to the router with a web browser.

System Status and System Hardware Details

The GUI opens to display the system status (system hardware details for
AR410 Series routers). Figure 5 shows the system status page for an AR450S
router, and points out key information contained on the page.
Figure 5: The System Status page of the AR450S
33