IBM pSeries 670 Service Manual page 483

Error Code Description
4065 0B32 Display alter tests detected fault in I/O book
4065 0B33 Display alter tests detected fault in I/O book
4065 0B34 Display alter tests detected fault in I/O book
4065 0B35 Display alter tests detected fault in I/O book
4065 0B36 Display alter tests detected fault in I/O book
4065 0B37 Display alter tests detected fault in I/O book
4065 0BF0 Display alter tests detected fault in I/O hub chip
0 (port x)
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the third I/O
book and the I/O subsystems.
3. Third I/O book
Location: U1.18-P1-H4
4. Call service support.
1. Check the cabling on the following RIO
ports:
a. U1.18-P1-H2/Q1
b. U1.18-P1-H2/Q2
2. Replace the primary I/O book,
Location: U1.18-P1-H2
Chapter 5. Error Code to FRU Index
463