IBM pSeries 670 Service Manual page 557

Error Code Description
406A 0EA0 Self-tests detected fault in MOPS service
processor code
406A 0EA1 Self-tests detected fault in processor subsystem
code on main processor
406A 0EA2 Self-tests detected fault in PRD code on service
processor
406A 0EA4 Self-tests detected fault in service processor
code
406A 0EA5 PRD detected a problem in the FNM code
406A 0EAA PRD: FNM is handling this error
406A 0EAF Self-tests detected unknown service processor
code and system type
406A 0EB0 Self-tests detected JTAG problem
406A 0EB1 Attention line 0 stuck fault
406A 0EB2 Attention line 1 stuck fault
406A 0EB3 Attention line 2 stuck fault
406A 0EB4 Attention line 3 stuck fault
406A 0EB5 Attention line 4 stuck fault
406A 0EB6 Attention line 5 stuck fault
406A 0EB7 Attention line 6 stuck fault
406A 0EB8 Attention line 7 stuck fault
Action/
Possible Failing FRU
1. Access the service processor error log. Find
the error log entry for the 406x 0EA0 error.
Look for a hardware error of the form 450x
yyyy, 460x yyyy, or 4B2x yyyy with a
timestamp within a few minutes of the 406x
0EA0 error. Follow the actions for this
hardware error.
2. If there is no hardware error in the service
processor error log with a timestamp that is
close to the 406x 0EA0 error, or following
the actions for the hardware error does not
resolve the problem, check for platform
firmware updates. If an update is available,
apply it.
3. If a platform firmware update is not
available, or the update does not correct the
problem, call service support.
1. Check for operating system updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Chapter 5. Error Code to FRU Index
537