IBM pSeries 670 Service Manual page 905

2. To determine if you are installing a long adapter or a short adapter, use the following steps. If you
know the length of your adapter, skip the following steps and proceed to step 3 on page 887.
a. Remove the adapter from its protective packaging and, if present, remove the plastic extension
handle from the end of the adapter.
b. Place the adapter or a blank filler over the cassette, with the upper-left corner aligned into the top
adapter-retaining clip.
1
5
4
1 Top Adapter-Retaining Clip
2 Cassette Linkage Assembly
2
3
3 Adapter
4 Bottom of Tailstock
5 Handle
Chapter 9. Removal and Replacement Procedures
885