Service Processor Setup Menu - IBM pSeries 670 Service Manual

Service Processor Setup Menu

The following Service Processor Setup Menu is accessed from the Main Menu:
SERVICE PROCESSOR SETUP MENU
1. Change Privileged Access Password
2. Change General Access Password
3. Enable/Disable Console Mirroring:
Currently Enabled
4. Start Talk Mode
5. OS Surveillance Setup Menu
NOT supported in LPAR mode.
6. Reset Service Processor
7. Reprogram Flash EPROM Menu
8. Serial Port Snoop Setup Menu
NOT supported in LPAR mode.
9. Scan Log Dump Policy:
Currently Never
98. Return to Previous Menu
99. Exit from Menus
0>
Note: Unless otherwise stated in menu responses, settings become effective when a menu is exited using
option 98 or 99.
714 Eserver pSeries 670 Service Guide