Long Adapter Installation - IBM pSeries 670 Service Manual

Long Adapter Installation

To install a long adapter, use the following procedure.
Note: Ensure that both the retaining arms for the long and short adapters are removed from the cassette
linkage assembly. Before continuing, see step 1a on page 880 to remove the arms.
1. Place the adapter into the cassette so that the upper-left corner of the adapter engages the top
adjustable adapter-retaining clip as shown in the following illustration:
1 Top Adapter-Retaining Clip
2 Cassette Linkage Assembly
904 Eserver pSeries 670 Service Guide
1
5
4
2
3
3 Adapter
4 Bottom of Tailstock
5 Handle