IBM pSeries 670 Service Manual page 143

Step 1020-2
There is a problem with the keyboard.
Find the type of keyboard you are using in the following table; then follow the instructions given in the
Action column.
Keyboard Type
Type 101 keyboard (U.S.). Identified by the size of the
Enter key. The Enter key is in only one horizontal row of
keys.
Type 102 keyboard (W.T.). Identified by the size of the
Enter key. The Enter key extends into two horizontal
rows.
Type 106 keyboard. (Identified by the Japanese
characters.)
ASCII terminal keyboard
Step 1020-3
Take the following actions:
1. Find the eight-digit error code in Chapter 5, "Error Code to FRU Index", on page 345.
Note: If the eight-digit error code is not listed in Chapter 5, "Error Code to FRU Index", look for it in
the following:
v Any supplemental service manuals for attached devices
v The diagnostic problem report screen for additional information
v The Service Hints service aid
v The CEREADME file (by using the Service Hints service aid)
Note: Service aids can be found in RS/6000 and Eserver pSeries Diagnostic Information for Multiple
Bus Systems.
2. Perform the action listed.
Action
Record error code M0KB D001; then go to "Step 1020-3".
Record error code M0KB D002; then go to "Step 1020-3".
Record error code M0KB D003; then go to "Step 1020-3".
Go to the documentation for this type of ASCII terminal
and continue with problem determination.
Chapter 3. Maintenance Analysis Procedures
123