IBM pSeries 670 Service Manual page 392

Error Code Description
101A D616 Problem with external UPS: utility failure
101A D716 Problem with external UPS: battery low
101A D756 Informational message about the IBF.
101A D766 Informational message about the IBF.
101A D776 Informational message about the IBF.
101A D816 External UPS: bypass active (informational
message)
101A D916 External UPS: power restored (informational
message)
101A DA16 External UPS: installed (informational message)
101A DB16 Problem with external UPS: UPS not available
101A DC16 External UPS: battery not low (informational
message)
101A DC56 Informational message about the IBF.
372 Eserver pSeries 670 Service Guide
Action/
Possible Failing FRU
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
Informational message.
Informational message.
Informational message.
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer's documentation
for the UPS.
3. Call service support.
Informational message.