IBM pSeries 670 Service Manual page 338

Table 2. Firmware Checkpoints (continued)
Checkpoint
E139
E13A
E140
E145
E149
E14C
E14D
E150
E151
E152
E153
E154
E155
E156
E158
E15B
E15F
E170
E172
318 Eserver pSeries 670 Service Guide
Description
Create node aliases and system aliases
Create packages node
Operating system load
Early debug code activated; firmware is
halted
Create boot mgr node
Create terminal-emulator node
Loading boot image
Create host (primary) PCI controller node
Probing primary PCI bus
Probing for adapter FCODE, evaluate if
present
End adapter FCODE, probe/evaluate
Create PCI bridge node
Probing PCI bridge secondary bus
Create PCI Ethernet node
System firmware waiting for virtual terminal
to be opened on HMC for SMS menu to be
displayed
Transferring control to operating system
(service mode boot)
Adapter VPD probe
Start of PCI Bus Probe
First pass of PCI device probe
Action/
Possible Failing FRU
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
See "Boot Problems" on page 342.
Press the g key on the serial interface.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
See "Boot Problems" on page 342.
If a location code is specified, replace the
adapter at that location code.
If no location code is specified, go to "MAP
1542: I/O Problem Isolation" on page 261.
If a location code is specified, replace the
adapter at that location code.
If no location code is specified, go to "MAP
1542: I/O Problem Isolation" on page 261.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
If a location code is specified, replace the
adapter at that location code. If no location
code is specified, go to "MAP 1542: I/O
Problem Isolation" on page 261.
Open a virtual terminal window on the
HMC.
See "Boot Problems" on page 342.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.