IBM pSeries 670 Service Manual page 445

Error Code Description
20EE 0022 The boot-device environment variable
contained an entry that exceeded 255
characters in length
20EE 0100 Fcode resident on an I/O adapter is not
supported on this system
20FB 0010 Failed to find keyword offset of SPCN
configuration table in NVRAM.
20FB 0020 Invalid SPCN configuration table flag before
SPCN table update.
20FC 0020 Failed to retrieve power, package, and/or
cooling VPD via SPCN for the corresponding
subsystem. Service processor mailbox failed
to get VPD
20FC 0021 Failed to retrieve power, package, and/or
cooling VPD via SPCN for the subsystem.
Service processor mailbox failed to get power,
packaging, and cooling device VPD
20FC 0030 Damaged power, packaging, and/or cooling
device VPD format in SPCN configuration
table
20FF 0001 Problem with VPD
20FF0010 Invalid VPD (defect ROM structure for PCI)
20FF0020 Invalid VPD (checksum mismatch)
Action/
Possible Failing FRU
If this error occurs during the installation of
AIX via a process called NIM push, the
set_bootlist attribute may not have been set
correctly on the NIM master. See the AIX 5.2
Installation Guide and Reference, order
number SC23-4389, for more information.
If this error occurs at any other time, complete
the following steps:
1. Check for platform firmware updates.
Apply if available.
2. Call service support.
Informational message. The adapter's Fcode
driver is not supported on this system. IBM
may produce a compatible driver in the future,
but does not guarantee one. Additional
information may be available from service
support.
This error code only affects boot-time
operation, not the adapter's functionality under
the operating system.
Call service support.
Call service support.
1. Check RIO cable connection.
2. Check for system firmware updates.
3. Replace the part specified by the location
code.
1. Check RIO cable connection.
2. Check for system firmware updates.
3. Replace the part specified by the location
code.
1. Check for system firmware updates.
2. Replace the part specified by the location
code.
1. Replace the part indicated by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
Chapter 5. Error Code to FRU Index
425