IBM pSeries 670 Service Manual page 627

Error Code Description
406F 0EA0 Error code generation/logging detected fault in
MOPS service processor code
406F 0EA1 Error code generation/logging detected fault in
processor subsystem code on main processor
406F 0EA2 Error code generation/logging detected fault in
PRD code on service processor
406F 0EA4 Error code generation/logging detected fault in
service processor code
406F 0EA5 PRD detected a problem in the FNM code
406F 0EAA PRD: FNM is handling this error
406F 0EAF Error code generation/logging detected
unknown service processor code and system
type
406F 0EB0 Error code generation/logging detected JTAG
problem
406F 0EB1 Attention line 0 stuck fault
406F 0EB2 Attention line 1 stuck fault
406F 0EB3 Attention line 2 stuck fault
406F 0EB4 Attention line 3 stuck fault
406F 0EB5 Attention line 4 stuck fault
406F 0EB6 Attention line 5 stuck fault
406F 0EB7 Attention line 6 stuck fault
Action/
Possible Failing FRU
1. Access the service processor error log. Find
the error log entry for the 406x 0EA0 error.
Look for a hardware error of the form 450x
yyyy, 460x yyyy, or 4B2x yyyy with a
timestamp within a few minutes of the 406x
0EA0 error. Follow the actions for this
hardware error.
2. If there is no hardware error in the service
processor error log with a timestamp that is
close to the 406x 0EA0 error, or following
the actions for the hardware error does not
resolve the problem, check for platform
firmware updates. If an update is available,
apply it.
3. If a platform firmware update is not
available, or the update does not correct the
problem, call service support.
1. Check for operating system updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Chapter 5. Error Code to FRU Index
607