IBM pSeries 670 Service Manual page 585

Error Code Description
406C 0D0F IPL detected fault in L3 cache module 15
406C 0EA0 IPL detected fault in MOPS service processor
code
406C 0EA1 IPL detected fault in processor subsystem code
on main processor
406C 0EA2 IPL detected fault in PRD code on service
processor
406C 0EA4 IPL detected fault in service processor code
406C 0EA5 PRD detected a problem in the FNM code
406C 0EAA PRD: FNM is handling this error
406C 0EAF IPL detected unknown service processor code
and system type
406C 0EB0 IPL tests detected JTAG problem
406C 0EB1 Attention line 0 stuck fault
406C 0EB2 Attention line 1 stuck fault
406C 0EB3 Attention line 2 stuck fault
406C 0EB4 Attention line 3 stuck fault
406C 0EB5 Attention line 4 stuck fault
406C 0EB6 Attention line 5 stuck fault
406C 0EB7 Attention line 6 stuck fault
Action/
Possible Failing FRU
L3 cache module 15 and L3 VPD card
Location: U1.18-P1-C13 and U1.18-P1-H2.1
1. Access the service processor error log. Find
the error log entry for the 406x 0EA0 error.
Look for a hardware error of the form 450x
yyyy, 460x yyyy, or 4B2x yyyy with a
timestamp within a few minutes of the 406x
0EA0 error. Follow the actions for this
hardware error.
2. If there is no hardware error in the service
processor error log with a timestamp that is
close to the 406x 0EA0 error, or following
the actions for the hardware error does not
resolve the problem, check for platform
firmware updates. If an update is available,
apply it.
3. If a platform firmware update is not
available, or the update does not correct the
problem, call service support.
1. Check for operating system updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Go to "MAP 1540: Problem Isolation
Procedures" on page 253.
Chapter 5. Error Code to FRU Index
565