Setting For Switching A Voice/Videophone Call; Setting Answer Method Of A Videophone Call During I-Mode; V.phone While Packet>83 - Docomo Prime SH-06A Instruction Manual

Notify switch mode
Setting for switching a voice/
Videophone call
This setting lets the other party know whether the FOMA terminal
can be switched between a voice call and a Videophone.
When the Notify switch mode is set to "Deactivate", the other party
cannot switch the call.
The Notify switch mode cannot be changed during voice calls,
Videophone calls or outside the service area.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[Notify switch mode].
2
Select the setting/t/[Yes].
: To check settings: Select [Check Indication].
V.phone while packet
Setting answer method of a
Videophone call during i-mode
Set the following answering methods.
V.phone priority Answers incoming Videophone calls.
Packet priority Rejects incoming Videophone calls.
Voice mail Automatically connects to Voice Mail Service.
Call Forwarding Automatically connects to Call Forwarding Service.
Videophone calls, during Software updates, Pattern definitions updates
or data transmissions using a packet transmission, are rejected.
1
In the Custom menu, select [Settings]/[Phone
settings]/[Videophone set]/[V.phone while
packet]/select an answering method/t.
: [V.phone priority] setting does not automatically end the packet
transmission unless the Videophone is answered (The packet
transmission is disconnected when the call is answered).
: To set to [Voice mail] or [Call Forwarding], applying for the respective
service is required. If [Voice mail] or [Call Forwarding] is set without a
subscription, the Videophone call is set to [Packet priority].
83