Docomo Prime SH-06A Instruction Manual page 160

Setting check new message details
<Check new message>
Set whether to check by type of message (Mail, Message R/F).
1
In stand-by, press m/[Mail setting]/[Check new
message].
2
Select the type/t.
3
Select the setting/t/i.
Receiving i-mode mail selectively
1
In stand-by, press m/[Receive option]/[Receive
opt. set]/[ON]/[Yes].
All mail is received when new messages are checked even if Receive
option setting is set to [ON]. To not receive all mail, set the Mail to [OFF]
in Check new message.
Saving mail member
Unlike Broadcast mail, multiple mail members can be specified collectively.
Save up to ten mail members. Save up to five mail addresses per mail
member.
Charges are the same as when sending one mail. However, network
charges will increase as addresses are added.
1
In stand-by, press m/[Mail setting]/[Mail member].
2
Select a save destination/t.
3
Select a number to save/t.
4
Select the entry method/t.
5
Select/Enter a mail address/t.
: To save multiple mail addresses, repeat steps 3 to 5.
6
Press i.
158
<Receive opt. set>
<Mail member>
Submenu operations for mail member list screen
■
[Edit member]/edit the member name/t
[Reset one member]/[Yes]
[Edit member]
Enter up to 20 single-byte (10 double-byte) characters.
■ Submenu operations for mail member details screen
[Delete one]/[Yes]/i
[Del all members]/[Yes]/i
Registering Blog/SNS
Register an address and a title for posting on a blog/SNS. If the posting site
is specified as a mail address, the registered address is entered instead of
mail address and the registered title is entered instead of mail title.
Register up to five posting sites.
1
In stand-by, press m/[Mail setting]/[Blog/SNS
settings].
2
Select the registration destination/m.
: To check the registered details of the posting site: Press t.
: To delete the registered details of the posting site: Press a/[Yes].
3
Select the [Blog name] field/t/enter the posting
site name/t.
: Enter up to 32 single-byte (16 double-byte) characters.
4
Select the [Blog address] field/t/select the entry
method.
;
Select [Search phonebook]/select a name/t.
;
Select [Direct input]/enter an address/t.
;
Select [Sent messages]/select a recipient/t.
5
Select the [Blog title] field/t/enter the title/t.
: Enter up to 200 single-byte (100 double-byte) characters.
6
Press i.
<Blog/SNS settings>