Docomo Prime SH-06A Instruction Manual page 394

Setting call cost limit notice
Show a stock icon or sound an alarm in stand-by when the set maximum
call cost is exceeded after a call is ended. Also, reset total call cost on the
1st of each month.
1
In the Custom menu, select [Settings]/[NW
Services]/[Talk time/cost]/C/[Limit settings].
2
Enter the terminal security code/t.
3
Select the [Limit settings] field/t/[Enable].
4
Select the [Limit settings] field/t/enter limit/t.
5
Select the [Notice method] field/t/select the
notification method.
;
Select [Alarm + stand-by]/set the alarm tone, alarm volume,
and ring duration/i.
• For details on the setting method nsteps 3 to 5 of "Setting
alarms" on P. 383
;
Select [Stand-by].
6
Select the [Auto reset] field/t/select the
t/i.
: When set to [ON], the call charges are reset at 00:00 on the 1st of
each month.
7
Enter the PIN2 code/t.
When auto-reset is set to [ON], the call charges are also reset if date
and time are changed in Date settings (nP. 56) in the following month
or later.
If set Limit notice again when Limit settings message is displayed, the
message is deleted.
Deleting Limit settings message in stand-by
■
1
In stand-by, press t/select the stock icon [4]
(charge limit exceeded)/t.
2
Enter the terminal security code/t.
392
<Limit settings>
setting/
When Limit settings message is deleted, the message is not displayed
until All calls cost is reset or Limit settings is set again.
Calculator
Using the FOMA terminal as calculator
Calculate memories, percentages and consumption tax.
1
In the Custom menu, select [LifeKit]/[Calculator].
: In stand-by: Enter number/t/[Calculator].
2
Calculate.
Key operations for calculator
0 to 9 C ・ CE (Delete input
Number input
*
Decimal point
＋/－ switching #
q
＋ (Add)
r
－ (Subtract)
o
× (Multiply)
p
÷ (Divide)
t
= (Calculate)
*1 Press for 1+ seconds to copy calculation contents.
*2 Press twice to show the price without tax.
When calculating memories, results are retained even after the
calculator is ended.
Numbers after the decimal point are left off when calculating
consumption tax.
Changing tax rate
■
1
In the calculator screen, press s (for 1+
enter tax rate (01 to 99)/t.
c
number)
*1
a
RM (Recall memory)
i
% (Calculate percentage)
TAX (Calculate
s
consumption tax)
C
M+ (Add memory)
m
CM (Clear memory)
seconds)/
*2