Docomo Prime SH-06A Instruction Manual page 126

Setting various locks collectively
Keypad dial lock, IC card lock and Function lock can be set at once. Set the
item to lock in advance.
Refer to Keypad dial lock, IC card lock or Function lock for details of each
lock function.
1
In the Lock selection screen, select [Multi
[Yes].
: The set functions are locked, and the corresponding icons appear.
Disabling Multi lock
: In the Lock selection screen, select [Multi lock]/enter the terminal
security code/t.
Setting functions to lock
■
Select items to lock with Multi lock.
1
In the Lock selection screen, select [Multi lock
enter the terminal security code/t.
: In the Custom menu: Select [Settings]/[Security]/[Lock
enter the terminal security code/t/[Multi lock set].
2
Select an item to lock/disable/t/C.
: E appears for locked items and H appears for disabled items.
Setting Multi lock automatically
■
Multi lock can be automatically set when the Power saver mode is activated
in stand-by or when the FOMA terminal is closed.
Use the same steps with Multi lock to disable.
1
In the Custom menu, select
[Lock settings]/enter the terminal security
t/[Multi lock auto-set].
2
Select the setting/t/[OK].
124
<Multi lock>
lock]/
<Multi lock set>
set]/
settings]/
<Multi lock auto-set>
[Settings]/[Security]/
code/
Locking side key
<Side key lock>
Lock the side key when the FOMA terminal is closed to prevent errors.
1
In the Lock selection screen, select [Side key lock].
: When Side key lock is set, [X] appears.
Disabling Side key lock
: In the Lock selection screen, select [Side key lock].
Quick silent is available while a call is received even when Side key
lock is set.
Show call/received, Show sent/received
Setting display of Redials/Received
calls and Mail history
Histories are recorded even when Show call/received or Show sent/
received is set to [OFF]. Set this setting to [ON] to check the recorded
histories.
1
In the Custom menu, select [Settings]/[Security].
2
Select the item.
;
Select [Show call/received]/enter the terminal security
t/[Show rcvd calls].
;
Select [Show call/received]/enter the terminal security
t/[Show redial].
;
Select [Show sent/received]/enter the terminal security
t/[Show sent messages].
;
Select [Show sent/received]/enter the terminal security
t/[Show rcvd messages].
3
Select the setting/t.
Record message is not played if Show received calls is set to [OFF].
When Show redial is set to [OFF], Sent messages history of set to
Chaku-moji (nP. 67) cannot be viewed.
code/
code/
code/
code/