Using Bluetooth Function - Docomo Prime SH-06A Instruction Manual

Calls may be made accidentally if the FOMA terminal is carried in a bag
with the Stereo Earphone Set connected. Disconnect when not in use.
Calls may be made if an earphone/microphone without switch is rapidly
inserted and removed.
Receiving calls with switch
Receive voice/Videophone calls.
1
Connect the Stereo Earphone Set.
2
When a call is received, press the switch for 2+
seconds.
: Set the location to which the ring tone is output (nP. 100).
3
Press the switch for 2+ seconds to finish call.
Calls may be answered accidentally if the earphone/microphone with
switch is connected while the ring tone sounds. Disconnect when not in
use.
Auto answer setting
Receiving a call automatically when an
earphone is connected
Automatically answer voice/Videophone calls received while the
Stereo Earphone Set 01 (sold separately), etc. is connected.
When the Stereo Earphone Set is not connected, Auto answer setting is
not available even if set to [ON].
1
In the Custom menu, select [Settings]/[Phone
settings]/[Incoming settings]/[Auto answer
setting].
2
Select [ON]/enter a ring time/t.
Calls are answered without ringing or vibrating when the ring time is set
to "0 seconds".
Calls from other parties set for Reject calls are not answered.
Set different Auto answer setting and Record message ring times.
If both Voice Mail Service and Auto answer setting are enabled, and the
same number of seconds is set for both services, then Voice Mail
Service may take priority. To prioritize Auto answer setting, set a
shorter ring time than that set for the Voice Mail Service (This also
applies to the Call Forwarding Service).
Bluetooth

Using Bluetooth function

Connect the FOMA terminal to Bluetooth devices wirelessly.
Wireless communications with all the Bluetooth devices are not
completely guaranteed.
Supported version and supported profiles
Supported version
Bluetooth specification Ver. 2.0+EDR
*2
Supported profiles (Supported services)
HSP (Headset Profile)
HFP (Hands Free Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
HID (Human Interface Device Profile)
DUN (Dial-up Networking Profile)
OPP (Object Push Profile)
SPP (Serial Port Profile)
*1 The FOMA terminal and all Bluetooth function-installed devices have
ensured that they conform to the Bluetooth specification according to
the rules that the Bluetooth SIG defines, and are all authenticated.
However, operating methods might differ, or data might not be
exchanged even when they are connected wirelessly, depending on the
features or specifications of connecting devices.
*2 Standardizes the communication procedures of Bluetooth device per
feature of a device.
*1
Continued on next page
395