I-Channel; Displaying I-Channel - Docomo Prime SH-06A Instruction Manual

i-Channel

※ The i-Channel is only available in Japanese.
i-Channel is a service that sends news, weather and other
information to i-Channel supported terminals. Show the latest
information received automatically in stand-by using a ticker.
Additionally, press the i-Channel supported key to show the
latest information in a list of channels (to show a list of channels
nP. 201).
i-Channel is a paid service that requires a subscription (The
i-mode subscription is also required).
i-Channel has a "ベーシックチャネル (Basic channel)" provided
by DOCOMO and "おこのみチャネル (Favorite channel)" provided
by non-DOCOMO IP (Information Providers). Packet transmission
charges for automatically updating information provided by
"Basic channel" are not incurred. Packet transmission charges
for automatically updating information provided by "Favorite
channel" that can be customized are incurred. However, note that
the i-Channel service charge, packet transmission charges are
incurred for when detailed information are viewed in both "Basic
channel" and "Favorite channel".
Packet transmission charges are incurred for automatically
updating information and viewing detailed information during
international roaming.
Refer to "Mobile Phone User's Guide [i-mode] FOMA version" for
details on using i-Channel.

Displaying i-Channel

Subscribe to i-Channel, receive i-Channel information and
automatically show them in the stand-by ticker. Connect to the
site from the channel list to retrieve detailed information.
1
In stand-by, press c (J).
: Alternatively, select i-Channel ticker with the Optical TOUCH
CRUISER and press t.
: In the Custom menu: Select [i-mode]/[i-Channel]/[Run i-Channel
list].
: While i-appli stand-by is set: Press c (J) (for 1+ seconds).
: In the viewer position, touch the i-Channel ticker to point the cursor.
Then, touch again to display and operate with touch panel.
2
Select a channel/t.
Receiving the latest information
Information may not be received when signal is weak, such as when the
handset is turned off or outside the service area. A ticker appears in
stand-by if information is received when the channel list is shown.
The ring tone and vibrator are not activated even when information is
received. However, while information is received, the mail send/
received LED flashes.
Depending on settings, information may be received when the channel
list is shown.
Changing the i-Channel host
Set the i-Channel host in Access point setting of Common Settings of
i-mode setting. The setting does not normally need to be changed.
The i-Channel ticker does not appear when the i-Channel host is
changed. However, when the channel list is viewed, the latest
information is received and the i-Channel ticker appears.
Information may not be automatically updated when the host is
changed. View the channel list to receive the latest information.
201