Docomo Prime SH-06A Instruction Manual page 104

Changing an image from stand-by
■
<Quick Stand-by Display Setting>
1
In stand-by, press 4 (for 1+ seconds)/[Agree].
: Alternatively, touch the stand-by display for a while in the viewer
position and touch [Agree].
: The image is displayed in full-screen.
2
Select an image with v/t.
: In the viewer position: Quickly slide to the left/right to select an
image/touch the screen to display the keys/touch [OK] of the
control key.
: Select an image from the folder for which the image set to the
stand-by display is saved.
• Stand-by display cannot be changed when there is only one image
in the folder.
• Stand-by display cannot be changed when other than the preset
Kisekae Tool is set.
: Stand-by display cannot be changed when i-motion or i-appli is set.
: Stand-by (L) can be set in the normal position/vertical view with the
viewer position and Stand-by (W) can be set in the horizontal view
with the viewer position.
Operations of images set as stand-by
■
Perform the following operations to play the Flash movie, animated GIF,
or i-motion set as stand-by.
Opening the FOMA terminal
Pressing H in stand-by while the image is stopped
Returning to the stand-by display from others
Flash movie, animated GIF
Played from the first frame up to approximately 20 seconds. A frame of
the stopped Flash movie/animated GIF appears as the stand-by display
when playback finishes. Press H during playback to switch pause/
playback.
i-motion
Played from the first frame up to approximately 20 seconds. The first
frame appears as the stand-by display when playback finishes. Press H
during playback to return to the first frame and stop. Press H again to
resume playback.
102
To switch audio on/off during playback: Press y (for 1+ seconds).
When displaying the stand-by display, the Flash movie such as a clock,
etc. or animated GIF stops after a set length of time.
If the Flash movie clock is stopped, play the Flash movie to restart it. If
the clock time is not correct, the time is updated when restarting the
Flash movie and the correct time is displayed.
Flash movie sound is not played.
In the Power saver mode, press a key to turn on the screen. A function
assigned to the key is executed during voice call only.
Displaying calendar
<Calendar display>
Display the calendar on the stand-by display.
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[Set screen]/[Calendar display].
2
Select the display method/t.
: For [1 month] and [2 months]: Select [1 month]/[2 months]/select
the display position/t.
Calendar operations in stand-by
■
To show the previous and following months: Press u.
• In the viewer position: Quickly slide up/down.
To switch among stand-by, calendar and stand-by memo display: Press
H.
While the calendar is shown, i-Channel ticker does not appear.
While the calendar is shown, received call volume adjustment, i-Widget
and Shortcut menu are not available even if u is pressed. Press H to
hide the calendar, and then operate.
In the viewer position, the display position is not reflected.