Docomo Prime SH-06A Instruction Manual page 333

[Undo]
Undo one step. Undo again to return to unedited still picture.
Changing size of still pictures
1
In the image editing screen, press C/[Trimming].
2
Select the size/t.
3
Specify the portion to trim with w/t.
: To zoom in/out: Press C/i.
• Zooming in/out is not available for [Icon (12-part)].
Horizontal size of the still picture is enlarged or reduced. Vertical size of
the still picture is centered and margins are added to top and bottom if
the height is less than screen size.
Pasting character stamps
1
In the image editing screen, press
[Character stamp].
2
Select the type/t.
: For [Free word]: Input text/t.
• Enter up to 22 single-byte (11 double-byte) characters. Text that
exceeds the display width is cut.
3
Adjust the location to paste with w.
: To change the font size: Press m/a.
: To change the font color: Press C/select the font color/t.
4
Press t.
Setting contour manually
Manually set the contour information for each part of the face used in Face
effects, Face stamp, and Facial treatment.
1
In the image editing screen, press C/[Change face
pos].
<Trimming>
<Character stamp>
C/[Stamp]/
<Change face pos>
2
Select the part to specify.
: To specify face contour (red outline): Press i.
: To specify mouth contour (yellow outline): Press C.
: To specify left eye contour (green outline) and right eye contour (blue
outline): Press m.
: Press each key to switch the position of [+].
3
Specify the contour.
Example: For face contour
Move [+] to upper left
of contour with w.
: Repeat steps 2 and 3 and specify all contours.
4
Press t.
Making up people's faces
Whiten or add natural make up to still pictures of people's faces.
1
In the Custom menu, select [Data box]/[My picture].
2
Select a still picture/C/[Edit data]/[Facial
treatment].
3
Press C/select an effect/t.
: For details on saving a still picture nstep 4 of "Editing still pictures"
on P. 329
When facial contours are not properly extracted nP. 331
i
Move [+] to lower right
of contour with w.
<Facial treatment>
331