Using Data Security Service - Docomo Prime SH-06A Instruction Manual

Docomo prime series w-cdma and gsm/gprs phone
Table of Contents

Advertisement

Reject unknown cannot be set simultaneously with Set mute ring time.
The Public mode (Drive mode) is prioritized when set with Set mute ring
time.
When setting the mute ring time, set whether to record calls
disconnected during the mute ring time duration in Received calls.
1
In the Custom menu, select [Settings]/[Snd/Vibrator/
Manner]/[Set mute ring time]/[ON].
: When [OFF] is set, the operation is completed.
2
Enter the mute ring time/t.
3
Select the setting/t.
Set the mute ring time shorter than the ring duration for Record
message or Voice Mail Service to prioritize Set mute ring time.
Set mute ring time is activated for calls from callers in the phonebook
while All lock is set, Omakase Lock is set, or Function lock is applied to
the Phonebook.
When Set mute ring time and the Manner mode are both set and the set
time passes, the operation follows the Manner mode settings. However,
the answering duration for Record message includes the time before
the ring tone sounds.
Reject unknown
Rejecting a call from a caller unset in
phonebook
Set the handset to reject calls from callers not in the phonebook.
The caller hears a busy signal. The stock icon [B] (missed call) appears
and the call is recorded in Received calls.
This setting is available only when a caller sends notify of the caller ID. It
is recommended to also set the Caller ID Request Service.
When Accept calls is set, Reject unknown cannot be set.
Reject unknown is prioritized when set with the Public mode (Drive
mode).
Also when Reject unknown is set, Reject calls by reason of
non-disclosure is prioritized for calls with no caller ID.
Reject unknown cannot be set simultaneously with Set mute ring time.
Disable Ring start time and try again.
SMS and i-mode mail are received normally regardless of the setting of
this function.
1
In the Custom menu, select
[Accept/Reject calls]/enter the terminal security
code/t/[Reject unknown].
2
Select the setting/t.
Data Sec. Service

Using Data Security Service

Data Security Service
The Data Security Service is a service to store your FOMA terminal data
such as phonebook, images, mails, ToruCa, or schedules, (henceforth
referred to as the saved data) at the DOCOMO Data Storage Center and
the saved data at the Center can be restored in the event of data loss due to
the loss of the FOMA terminal itself or upgrading the handset. In addition, a
notice that your mail address has been changed can be sent collectively.
Packet transmission charges are not incurred for sending them. With a PC
(My docomo), this service can be used more conveniently.
Refer to "Mobile Phone User's Guide [i-mode] FOMA version" for details
on the use of the Data Security Service.
The Data Security Service is a paid service that requires subscription
(i-mode subscription is also required).
[Settings]/[Security]/
127

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prime SH-06A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents