Setting Position Location - Docomo Prime SH-06A Instruction Manual

Location history
■
[_], the icon indicating that location is positioned overseas, appears for
positioned location history in the location history list screen/location
history screen. [.] appears in the location history list screen when the
time difference is adjusted.
If [Read Map] is selected from the location history positioned overseas,
the selection screen for viewing a map either on the i-mode site or i-appli
appears. Select the view mode.
Position location
Checking your location
Check the present location and check your place. Use this
function for more convenient use such as showing a map from
positioning location information, changing the location
information to a URL, sending mail with the URL pasted, etc.
Transmission charges are not incurred when the present location is
positioned. However, packet transmission charges are applied when a
map is displayed based on the location information.
Change sound/volume/LED color for Position location (nP. 97, P. 111).
1
In the Custom menu, select
[Position location].
: In stand-by: Press y (for 1+ seconds).
• It is activated following the GPS button setting after positioning.
: [B] flashes while GPS positioning is being performed.
[LifeKit]/[Map/GPS]/
Accuracy level ★★★ : Almost accurate location information
Error is less than 50 m
Accuracy level ★★☆ : Relatively accurate location information
Error is less than 300 m
Accuracy level ★☆☆ : Rough location information
Error is 300 m or more
: Accuracy level is a rough indication. It may differ depending on the
radio wave condition of the surroundings.
: To use the location information as a result of location positioning at
the displayed accuracy level while the present location is being
positioned: Press C.
: To cancel position location: Press i/t.
2
Select a usage.
;
Select [Read Map].
• GPS compatible i-appli set in Map setting is activated.
; Select [Map/GPS appli]/select i-appli/t.
;
Select [Paste to mail]/[OK]/compose and send a mail.
• The Location URL to be sent appears only on the i-mode
supported terminal.
;
Select [Add to phonebook]/add to the phonebook.
;
Select [Attach to image]/select an image/t/C/select the
saving method/t.
: To check the location information: Press i.
: To retry position location: Press C.
Set position loc.

Setting position location

Setting GPS button
<GPS button setting>
Set the operation that is automatically launched after positioning the present
location by pressing y for 1+ seconds.
1
In the Custom menu, select
[Set position loc.]/[GPS button setting].
2
Select the action/t/[OK].
[LifeKit]/[Map/GPS]/
309