Docomo Prime SH-06A Instruction Manual page 274

B
GPS compatible i-appli software
B
Software incompletely downloaded
Software transferred using the iC transfer service
A
(nP. 296)
2
Select software to run/t.
: A message may appear depending on the software. Operate
according to the message.
If the FOMA card used for downloading i-appli is not inserted, some
i-appli may not run (start).
When the time set for Alarm (Alarm/Schedule/Reception/Recording)
arrives, running software stops and the alarm screen appears. The
software resumes when the alarm screen is closed. However,
depending on the i-appli, the software may be ended when the alarm is
activated.
Mail-type i-appli can also be started from Inbox, Outbox or Unsent
messages. Select the mail-type i-appli folder from each box list.
Depending on the i-appli, if a new version of the software is available, a
confirmation screen for upgrading the software appears at startup and
some software can be upgraded.
Some i-appli may save i-appli used data to the microSD Card. Saved
i-appli used data can be checked in the i-appli used data list. Check
i-appli used data properties for the software that uses i-appli used data
(nP. 291).
If the microSD Card or the battery pack is removed when saving i-appli
used data to the microSD Card or deleting it from the microSD Card,
i-appli used data in the microSD Card may be unable to be viewed. In
this case, format the microSD Card with SH-06A (nP. 353). Note that
all the data including i-appli used data are deleted when the microSD
Card is formatted.
Some data saved on the microSD Card may not be available on other
models.
Reading/Writing data saved on/to the microSD Card from i-appli may
become impossible while other running functions are using the card.
Mail-type i-appli is not available when 2in1 mode is set to [B mode].
272
When i-appliDX software is activated
Some i-appliDX software may transmit data to verify the validity of the
software regardless of the software Network set. The number of
connections and connection timing differ depending on the software.
If the correct date and time are not set, the validity cannot be checked
and the software cannot start.
If the software is not validated, it cannot start until the validity is
checked.
Submenu operations for software list screen
■
[Software info]
[Upgrade]
[Delete]
/[Delete one]/[Yes]
/[Delete selected]/select software/t/C/[Yes]
/[Delete all]/enter the terminal security code/t/[Yes]
[Stand-by display]/[Yes]
For details on i-appli stand-by nP. 289
[Stand-by NW set]/select the setting/t
Set whether to transmit data from i-appli stand-by.
[Map setting]/select the setting/t
Set GPS compatible i-appli started when selecting Map in the Map/
GPS menu, [!] in the Stand-by Display Touch Launcher or [Read
Map] from the location information of each function.
[Set software use]
[Program guide key]/select the setting/t
Set Program guide i-appli started from 1Seg.
[Sort]/select the sorting method/t
[Quick search appli]
/[Quick search map]/select the setting/t
Set i-appli started with [Map Search (text)] and [Map Search
(voice)] of Quick search.
nP. 290
nP. 274