Docomo Prime SH-06A Instruction Manual page 566

14
Confirm all the settings in the [全般]
(General) tab.
: When two or more modems are connected to
the PC
For FOMA USB Cable with Charge Function
02: Make sure that [FOMA SH06A] in [接続
の方法] (Connection method) shows E.
When H appears instead, change to E. For
modems other than [FOMA SH06A], change
E to H.
For Bluetooth connection: Make sure that
the [(in-use Bluetooth-linked standard
modem)] or [(Bluetooth modem provided by
a Bluetooth maker)] in [接続の方法]
(Connection method) shows E. When H
appears instead, change to E. For modems
other than the [(in-use Bluetooth-linked
standard modem)] or [(Bluetooth modem
provided by a Bluetooth maker)], change E
to H.
: Confirm that [ダイヤル情報を使う] (Use dialing
rules) shows H. When E appears instead,
change to H.
15
Click the [ネットワーク]
(Networking) tab, confirm all
settings and click [設定] (Settings).
: Set [呼び出すダイヤルアップサーバーの種類]
(Type of dial-up server to call) to
[PPP: Windows95/98/NT4/2000, Internet].
: In the [この接続は次の項目を使用します]
(Components checked are used by this
connection) field, E should appear only for [イ
ンターネットプロトコル (TCP/IP)] (Internet
protocol (TCP/IP)). Leave [QoS パケットスケ
ジューラ] (QoS packet scheduler) settings as
is. No changes are necessary.
: The PPP setting screen appears.
: For TCP/IP settings used for connecting to an
Internet service provider, confirm with the Internet
service provider or network administrator.
16
Check all options to show H and
click [OK].
: Properties screen of the host reappears.
17
Click [OK] on the [プロパティ ]
(Properties) screen.
: The host and TCP/IP protocol are set.
: Refer to P. 20 for details on connecting to
dial-up network.
Setting a dial-up network on Windows
■
2000
On Windows 2000, use ネットワークの接続ウィ
ザード (Network connection wizard) to set both
the host (APN) and TCP/IP protocol.
Example: Using <cid>=3 to connect to mopera U,
the DOCOMO Internet connection
service
Subscription to mopera U requires a charge.
1
Click [スタート] (Start) menu b [プログラ
ム] (Programs) b [アクセサリ]
(Accessories) b [通信] (Communications)
b [ネットワークとダイヤルアップ接続]
(Network and dial-up connections).
: The network and dial-up connections screen
appears.
2
Double-click the [新しい接続の作成]
(Create new connection) icon.
: The location information screen appears.
: This screen appears the first time the [新しい接
続の作成] (Create new connection) icon is
double-clicked.
For the second and subsequent times, proceed
to step 5.
3
Enter [市外局番] (Area code) and
click [OK].
: The phone and modem options screen appears.
4
Click [OK].
: A network connection wizard screen appears.
5
Click [次へ] (Next).
: The screen to select network connection type
appears.
17