Retrieving Toruca - Docomo Prime SH-06A Instruction Manual

Retrieve ToruCa

Retrieving ToruCa

Save up to 200 ToruCa. Capacity may decrease depending on the
available memory (nP. 359).
Retrieve/Save ToruCa up to 1 KB each and ToruCa (details) up to 100
KB each.
Some ToruCa may not be updated or redistributed using mails or Ir
communication depending on the settings of IP (Information Provider).
Hold the FOMA terminal up to the scanning device to use ToruCa with
the automatic reading function. Up to 20 used ToruCa are saved in the
[Used ToruCa] folder. When the save limit is exceeded, ToruCa are
deleted starting with the oldest retrieved date.
When saving or copying ToruCa/ToruCa (details) while recording 1Seg if
the maximum number of items that can be stored is exceeded, the
confirmation screen asking whether to finish recording 1Seg and to save
ToruCa appears. Select [Yes] to cancel recording, delete the
unnecessary data and save ToruCa.
Retrieving from a scanning device
Hold the FOMA terminal up to a scanning device and retrieve ToruCa/
ToruCa (details).
The stock icon [D] (new ToruCa) appears when a
new ToruCa is retrieved using IC card functions.
[Q] appears on the upper part of the screen when
there is an unread ToruCa.
When the FOMA terminal is closed, the number of
new ToruCa appears on the sub display.
300
1
When ToruCa/ToruCa (details) is retrieved, the
retrieval complete tone sounds, the called LED
flashes, and ToruCa/ToruCa (details) appears.
: If no operations are performed, the previous screen reappears in
approximately 15 seconds.
: For ToruCa including detailed information, a confirmation screen
appears to select whether to access a site to retrieve ToruCa
(details) when retrieval is completed.
ToruCa cannot be retrieved using a scanning device when the IC card
lock is set or when Retrieve ToruCa from IC card is set to [OFF].
If ToruCa is retrieved from the scanning device when a screen other
than stand-by is shown, ToruCa/ToruCa (details) or a confirmation
screen for connection of sites does not appear even after the retrieval is
completed.
Retrieving from a file attachment of i-mode mail
or Message R/F
For details on retrieving ToruCa from a file attachment of Message R/F
nP. 162
1
Select a file to save from mail/t.
2
Press C/[Yes].
3
Select a save destination/t.