Activating Docomo Connection Manager - Docomo Prime SH-06A Instruction Manual

7
Confirm the destination program
folder and click [次へ] (Next).
: To change the destination program folder, click
[変更] (Change), select a destination for
installation and click [次へ] (Next).
8
Click [インストール] (Install).
: Installation begins.
9
Click [完了] (Finish).
: Installation is completed.
For Windows XP, when MSXML6 and Wireless LAN
API are not installed, their installation is required
before installing DOCOMO Connection Manager.
When confirmation screen appears, click [Install] and
install MSXML6 and Wireless LAN API. Restart
Windows after installation of MSXML6 and Wireless
LAN API is completed, then installation of DOCOMO
Connection Manager automatically begins.
Activating DOCOMO
Connection Manager
1
Select [スタート] (Start) menu b
[NTT DOCOMO] b [ドコモ コネク
ションマネージャ ] (DOCOMO
Connection Manager) b [ドコモ コ
ネクションマネージャ ] (DOCOMO
Connection Manager).
: When the software is activated for the first time,
the setting wizard appear. Operate and make
the setting according to the guidance from the
software to prepare for the connection to the
Internet. Refer to "DOCOMO Connection
Manager operation manual.pdf" for details.
Communication is not disconnected by only ending
the internet browser or mail software.
Be sure to disconnect the communication with [切断
する] (Disconnect) button of DOCOMO Connection
Manager when communication is not in use.
If the automatic update is set for updating OS, etc.,
the software is automatically updated and it may lead
to higher Packet transmission charges.
10
Connect/
Disconnect
button