Answering An Incoming Call During A Call - Docomo Prime SH-06A Instruction Manual

Answering an incoming call during a call

Place the current voice call on hold and answer an incoming voice call.
1
When a beeping tone is heard during a call, press s.
: The original call is automatically placed on hold and an incoming call
is connected.
: To switch between callers: Press s.
Disconnecting a call to answer an incoming call
Disconnect the current voice call and answer an incoming voice call.
1
When a beeping tone is heard during a call, press H.
: The ring tone for an incoming call sounds.
2
Press s.
: The incoming call is connected.
Making a separate call during a call
Place the current voice call on hold and make another voice call.
1
Dial another party's phone number during a call and
press s.
: The original call is automatically placed on hold.
: To switch between callers: Press s.
420
Call Forwarding Service
Using Call Forwarding Service
Call Forwarding Service is a service for forwarding voice/
Videophone calls to designated phone numbers when the
handset is outside the service area or turned off, or when calls
are not answered within set ringing time.
To prioritize Call Forwarding Service when Record message (nP. 76)
is also set, set the ringing time for Call Forwarding Service shorter than
the answering duration for Record message.
If a voice/Videophone call is not answered when Call Forwarding Service
is set to "Activate", the call is saved as "Missed call" in "Received calls"
and the stock icon [B] (missed call) appears in stand-by.
For Videophone calls, the forwarding guidance is not played. The caller
sees a message that the call is being forwarded.
When a call is received with Call Forwarding Service set to "Activate",
the ring tone sounds for the set ringing time (can be changed:
nP. 421). Answering during the set ringing time connects calls. Calls
are automatically forwarded to the set destination after the set time
passes. Forwarded calls are noted in stand-by and Received calls.
However, when ringing time is set to "0 seconds", calls are not saved in
Received calls.
Collect calls (receiver accepts charges) are not connected when Call
Forwarding Service is set to "Activate".
Automatically forward another voice call received during a call.
Call Forwarding is automatically deactivated if Voice Mail Service is set
to "Activate".
Setting Call Forwarding Service from the FOMA terminal is not
available from outside the service area. In such cases, access Call
Forwarding Service from touch-tone landline phones and payphones
using network security code. Remote Control must be set to "Activate"
in advance.
When the 2in1 mode is set to [Dual mode], select [Number A] or
[Number B] to activate/deactivate Call Forwarding Service.