Docomo Prime SH-06A Instruction Manual page 116

VeilView
Preventing others from seeing display
Display the pattern (design or animation) on the screen to
prevent others from seeing the screen.
1
Press $ (for 1+ seconds).
: When VeilView is set, [P] appears.
: Alternatively, perform Display pattern or Density.
Disabling VeilView
: Press $ (for 1+ seconds).
VeilView is canceled when the FOMA terminal is turned off. However,
when the Manner mode is set with Linked manner mode set to [ON],
VeilView remains enabled.
The colors of the screen may look different depending on the displayed
screen.
Setting VeilView in conjunction with Manner
mode
<Linked manner>
VeilView is automatically set when the Manner mode is set.
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[VeilView]/[Linked manner].
2
Select the setting/t.
Set/Disable VeilView even while the Manner mode is set.
114
Setting pattern of VeilView
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[VeilView]/[Display pattern].
2
Select the pattern/i.
3
Select the display pattern.
;
Select [Tile display]/select the setting/t.
;
Select [Center display]/select the display size/t.
The effect of preventing others from seeing differs depending on the
selected patterns.
Changing VeilView density and view
1
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[VeilView]/[Density].
2
Set the density/view.
: To change the density: Change the density with u.
: To adjust the front view: Adjust the view with v.
The density is more effective to prevent others from seeing the display
in order of [Dark], [Normal] and [Light].
The view cannot be adjusted if Density is set to [Light].
<Display pattern>
<Density>