Setting On Hold/Hold Tone; Using Public Mode - Docomo Prime SH-06A Instruction Manual

Using Public mode

Voice Mail Service *1 , Call Forwarding Service
*2
Service are activated in priority to the Public mode.
*1 For voice calls whose ringing time is other than 0 seconds, the
service is activated after the Public mode guidance.
*2 When the caller ID is sent, the Public mode is activated.
For calls from callers rejected by Nuisance Call Blocking Service, the
Public mode is not activated.
Using Public mode (Drive mode)
<Public mode (Drive mode)>
The Public mode is an automatic answering service used to ensure the
manner in public places. When a voice call is received, the caller hears a
message stating you are driving or otherwise unable to speak (on the train,
bus, in a movie theater, and others) and the call is disconnected.
Activating/Deactivating the Public mode is only available in stand-by
(Available even when [A] is showing on the screen).
Calls can be made normally in the Public mode.
This function is not available during data transmissions.
1
In stand-by, press * (for 1+ seconds).
: The Public mode is set and [_] appears.
: If the Manner mode is also set, the Public mode setting is prioritized.
Disabling the Public mode (Drive mode)
: In stand-by, press * (for 1+ seconds).
• The Public mode is disabled and [_] disappears.
■ When Public mode (Drive mode) is set
A ring tone does not sound when a voice/Videophone call is received. The
stock icon [B] (missed call) appears on the display and the call is saved in
Received calls (nP. 64).
*1 , and Caller ID Request
When a voice call is received, the caller hears a message stating that
you are driving or otherwise unable to speak and the call is disconnected.
When a Videophone call is received, the Public mode video guidance is
played to the other party and the call is disconnected. If the handset is
turned off or in a place with no signal, the guidance for outside service
area plays.
The FOMA terminal will not vibrate when i-mode mail, SMS, or Message
R/F is received even if the Vibration mode is set. Although a ring tone
does not sound, the message is received automatically, and the received
mail icon appears. Set the dedicated alarm tone (beep sound), vibrator
and called LED of Area Mail in the Manner Public Setting (nP. 164).
When a data transmission is received, the vibrator, ring tone and called
LED are not activated.
If Location provision is set to [許可] for usage settings of each service
when location information provision, supported by Map/GPS function, is
requested, a confirmation screen for location provision is displayed, the
GPS positioning screen appears, and the location is provided after GPS
positioning. However, Location provision/accept, Location provision/
notify, vibrator or called LED does not operate. When Location provision
is set to [毎回確認] for usage settings of each service, location
information is not provided.
Even if the alarm time arrives in the Public mode, the alarm does not
sound. The Called LED, vibrator and sub display are not activated.
If emergency numbers (110, 119, and 118) are dialed in the Public
mode, the Public mode is disabled after the call.
75