Checking Missed Calls; Recording Messages When Calls Cannot Be Answered; Record Message (Voice/Videophone Calls)>76 - Docomo Prime SH-06A Instruction Manual

Using Public mode (Power OFF)
<Public mode (Power OFF)>
The Public mode (Power OFF) is an automatic answering service used to
ensure manner in public places. Set the Public mode (Power OFF) to play a
message for the caller stating that the power is off and you are unable to
speak (in a hospital, airplane, near the priority seats on the train), and the
call ends.
1
In stand-by, press *25251/s.
: The Public mode (Power OFF) is set (Nothing changes in stand-by).
: When a call is received while the Public mode (Power OFF) is set, a
message stating that the owner of the phone is currently in a place
that does not allow the mobile phone use is played.
Disabling the Public mode (Power OFF)
: In stand-by, press *25250/s.
• The Public mode (Power OFF) is disabled.
Checking the Public mode (Power OFF) setting
: In stand-by, press *25259/s.
• Check the current setting.
When Public mode (Power OFF) is set
■
The Public mode (Power OFF) remains set until disabled. The setting is not
canceled when the power is just turned ON. The Public mode (Power OFF)
message is played when the handset is outside the service area or in a
place with no signal. When a call is received, a message stating that the
owner of the phone is in a place that does not allow mobile phone use is
played and the call is disconnected.
76
Missed calls

Checking Missed calls

If an incoming call is not answered, the stock icon [B] (missed
call) and the number of missed calls appear in the stand-by
display (missed calls).
If missed calls are checked or the stock icon is selected and c is
pressed for 1+ seconds, the stock icon disappears.
1
In stand-by, press t.
: Alternatively, press q (M) to check Received calls.
2
Select the stock icon [B] (missed call)/t.
: The Received calls list screen appears. [D] appears below the
missed calls.
: Use the same operations as Received calls to check the details.
Record message (voice/Videophone calls)
Recording messages when calls
cannot be answered
Set Record message to record messages when a call cannot be
answered. When a voice call is received, a voice message is
played and the caller's message is recorded. When a Videophone
call is received, a reply image is sent and the caller's message
and image are recorded.
Record message is not available when the FOMA terminal is turned off or
outside the service area. This function is convenient when used in
conjunction with the Voice Mail Service.
Record up to three Record messages for voice calls (approximately 15
seconds each). Voice memos recorded during a voice call or in stand-by
are also included in these three Record messages for voice calls.