Docomo Prime SH-06A Instruction Manual page 331

Attaching still pictures and sending i-mode mail
Send i-mode mail with a still picture attached. In addition, send it as
Deco-mail or post it on a blog/SNS.
For details on file attachments nP. 140
1
In the Custom menu, select [Data box]/[My picture].
2
Select a still picture/m.
3
Select the sending method/t.
: For details on sending nstep 2 of "Sending still pictures or moving
pictures after shooting" on P. 228
4
Compose and send a mail/Deco-mail.
Sending still pictures using high-speed Ir
communication (IrSS™ function)
Select a still picture (JPEG image) from My picture, then send it to an IrSS™
function-compatible device.
1
In the Custom menu, select [Data box]/[My picture].
2
Select a still picture/a.
: Set receiving FOMA terminal to receive data.
3
Select the sending method/t.
: If [Send w/reduced] is selected, the still picture that is reduced to
2048×1536/1536×2048 or smaller for image size and 1.2 MB or less
for file size is sent.
: To cancel communication: Press C.
IrSS™ function is a simplex communication function compliant with
IrSimple™ 1.0 standard (Home Appliance Profile).
IrSS™ communication performs transmission without confirming the
response from the receiver side since it uses a simplex communication.
The sender side completes the communication normally even if the
receiver side does not.
Edit image
Editing still pictures
Compare before and after images while editing without interruption.
Some editing menus may not be available depending on the original size
of still picture.
The results of Image effect, Correct image, or Facial treatment differ
depending on the still picture.
Some still pictures downloaded from devices other than the FOMA
terminal cannot be edited.
Image editing may result in a loss of image quality, or an increase/
decrease in the data size.
Flash movies and animated GIFs cannot be edited.
Respect personal image rights when editing face images, to avert any
legal issues.
Edited still pictures are compressed when saved and may appear
different during editing.
1
In the Custom menu, select [Data box]/[My picture].
2
Select a still picture/C/[Edit data]/[Edit image].
: Press a to display/hide the image editing menu. Select the image
editing menu and edit.
3
Edit the still picture.
Image editing screen
4
Press i/[Yes].
: To edit after saving: Press m.
Before
After
Continued on next page
329