Locking Ic Card Functions; Checking Ic Owner - Docomo Prime SH-06A Instruction Manual

Precautions for using Osaifu-Keitai
Use Osaifu-Keitai even when the handset is turned off.
Osaifu-Keitai is not available in the following situations.
The power has never been turned on after the battery pack was
removed and then attached
The battery pack is not attached
IC card is locked
Osaifu-Keitai compatible i-appli cannot be started in the following
situations.
The handset is turned off
A call is in progress
Function lock is applied to i-appli/i-Widget
Other functions are activated
IC card lock

Locking IC card functions

Lock IC card functions to restrict usage of IC card function.
1
In stand-by, press t (for 1+ seconds)/[IC card
lock]/[Yes].
: When IC card lock is set, [H] appears.
Disabling IC card lock
: In stand-by, press t (for 1+ seconds)/[IC card lock]/enter the
terminal security code/t.
Locking IC card functions when power is turned
on or off
<IC lock(power-on)/IC lock(power-off)>
1
In the Custom menu, select [Osaifu-Keitai]/[IC card
lock]/enter the terminal security code/t.
: Alternatively, select [Settings]/[Security]/[Lock settings]/enter
the terminal security code/t/[IC card lock].
2
Select an item/t.
3
Select the setting/t.
298
The battery is empty
Omakase Lock is enabled
i-mode is in progress
Set Omakase Lock to automatically lock the IC card.
While the IC card lock is set, ToruCa cannot be retrieved using a
scanning device, and the automatic reading function is not available.
When the battery pack is removed, the IC card lock is automatically set.
If the battery pack is reattached and the handset is turned on, the IC
card lock is disabled. However, if the battery pack is removed with the
IC card lock [ON] at power-on, the IC card lock is retained when the
battery pack is reattached and the handset is turned on.
When IC card lock is set or IC card lock is set using Omakase Lock, IC
card lock is retained even if the battery becomes empty and the power
turns off.
Check IC owner

Checking IC owner

Check whether the FOMA card currently inserted is registered as
the IC owner of the FOMA terminal.
1
In the Custom menu, select [Osaifu-Keitai]/[Check IC
owner].
Changing IC owner
<Change IC owner>
Delete the FOMA card information registered as the IC owner of the FOMA
terminal, the data on the IC card, and Osaifu-Keitai compatible i-appli.
1
In the Custom menu, select [Osaifu-Keitai]/[Change
IC owner].
2
Select [Reset IC owner]/[Yes].
3
Enter the terminal security code/t/[Yes].